RESTORE TEXTURE & ADD DURABILITY
Natural stones, such as sandstone and travertine, are high-end building materials used for indoor and outdoor surfaces. Coating or sealing unpolished stones is highly recommended to add durability and restore its beautiful texture. Coating and sealing can also prevent environmental damages. Ure-Seal coating is well sought-after for its super hydrophobic properties and ensures promising results for up to 2 years. The natural stone sealing is not affected by weather changes and remains waterproof due to its penetration into the surface’s pores. Once treated, the surfaces look natural and are not slippery, which is especially important for pool decks, pool copings, driveways, and many more regularly-used areas.
OUR STONE SEALING PROCESS
STEP 1: Visit from Certified Technician to Check & Verify Services Required
STEP 2: Sanitizing & Cleaning to Remove Stains/Dirt
STEP 3: Pressure Washing & Soft Washing to Remove Detergents or Acids
STEP 4: Technicians Replenish Sand Lost During Cleaning
STEP 5: Application of Ure-Seal Stone Sealant
STEP 6: All Set - Just Let Dry
POST-SEALING SERVICE INFO
DRYING TIME REQUIRED
Our stone sealing normally dries in sunny areas within 2-3 hours, but requires nearly 24-36 hours for curing. Shaded areas, low temperatures, or higher humidity can slow down the drying process. The surface may be kept open to foot traffic in 2-3 hours and to vehicular traffic in 24-36 hours. Ure-Seal recommends all sprinkler systems be turned off during this time to allow proper curing.
STONE SEALANT MAINTENANCE
Our stone sealer is a protectant that layers your stone surface with super hydrophobic coating, thereby reducing mold and mildew. Periodic washing with plain water to keep the area clean is recommended. Acids, gasoline, hydraulic fluids, and motor oil spills should be removed from the surface as soon as possible.